View SIL30C_421282.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SIL30C Series
DC/DC CONVERTERS * * * * C Class Non-isolated
12Vin single output
1 NEW Product
30A current rating Input voltage range: 10.2V - 13.8V Output voltage range: 0.9V - 5.0V Industry leading value * Cost optimised design * Excellent transient response * Output Voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time * Designed in reliability: MTBF of > 3.9 million hrs per Telcordia SR-332
The SIL30C Series is a new high density open-frame non-isolated converter for space sensitive applications. The converter has a wide input range (10.2 to 13.8Vdc) and offers a wide 0.9V to 5V output voltage range with a 30A load. The series offers remote ON/OFF, over-temperature protection and over-current protection as standard. Its current share facility supports parallel operation of multiple SIL30 units and the remote sense feature enables the SIL30C compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL30C reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) 0.9V to 5.0V 2.5% 0.2% max. 1.0% max. 0A/30A At turn-on At turn-off (See Note 2) Deviation 1.0% max. 100mV max. 50mV pk-pk 15mV rms 75mV 150s recovery to within regulation band 10%
INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards (pending) Material flammability Weight MTBF Telcordia SR-332 Fixed (See Note 7) 91% 300kHz typ. TUV Product Services IEC60950, UL/cUL60950 UL94V-0 28.3g (1oz) 3,994,753 9.0VDC 8.3VDC
Output setpoint accuracy Using 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot Undershoot Ripple and noise 5Hz to 20MHz Transient response (See Note 3) Current share INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 5) Power up Remote ON/OFF Nominal 12V No load Remote OFF (See Note 4) (See Note 2) Low line to high line Full load to min. load
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 8) Operating ambient, temperature Non-operating 0C to +80C -40C to +125C
Full load
10.2 to 13.8VDC 230mA 30mA 13.8A max. @ Io max. and Vin = 10.8V 150mA (pk-pk) Logic high >2.4VDC <0.8VDC <6ms <6ms
PROTECTION Short-circuit protection Over-temperature protection RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 9) 270F/20m esr max. (See Note 9) 2 x 680F/10m esr max. Foldback, non-latching Hiccup, non-latching
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E139421 UL60950 file No. E139421
TUV
TUV Product Service (EN60950) Certificate No. B0211 19870 205 CB report and certificate to IEC60950
File Name: SIL30C.PDF Rev: 04 Mar 2003
SIL30C Series
DC/DC CONVERTERS C Class Non-isolated
OUTPUT POWER (MAX.) 150W INPUT VOLTAGE 10.2-13.8VDC OVP N/A OUTPUT VOLTAGE (11) 0.9V - 5V
12Vin single output
2 NEW Product
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENT (MIN.) 0A OUTPUT CURRENT (MAX.) 30A
EFFICIENCY (TYP.) 91%
REGULATION LINE 0.2% LOAD 1.0%
MODEL NUMBER (10) SIL30C-12SADJ-V
Part Number System with Options
SIL30C-12SADJ-V
Mounting Option V = Vertical Mount H = Horizontal Mount
Product Family SIL = Single In Line
Rated Output Current 30 = 30Amps Performance C = Cost Optimised
Number of Outputs SADJ = Single Adjustable Output
Input Voltage 12 = 10.2V - 13.8V
Output Voltage Adjustment of the SIL30C-12SADJ Series
The ultra-wide output voltage trim range offers major advantages to users who select the SIL30C-12SADJ. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9V to 5.0V. When the SIL30C-12SADJ converter leaves the factory the output has been adjusted to the default voltage of 0.9V
Notes
1 Uses external resistor from TRIM to output ground. See Application Note 132 for details. 2 Measured with external filter. See Application Note 132 for details. 3 di/dt = 10A/s, Vin = Nom, Tc = 25C, load change = 0.5 lo max tp 0.75 lo max and 0.75 lo max to 0.5 lo max. 4 External input fusing is recommended. 5 Power up is the time from application of DC input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3m. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 See Application Note 132 for operation above 50C. 9 See Application Note 132 for ripple current requirements. 10 The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL30C-12SADJ-H. 11 This model has a wide trim output of between 0.9V to 5V. An external resistor adjusts the output voltage
PIN CONNECTIONS PIN NO. 1 2 3 4 5 6 7 8 9 10 FUNCTION TRIM No Pin Ground Power Good Not Connected Current Share Ground Ground Remote ON/OFF Remote sense (GND) Remote sense (O/P) Vin PIN NO. 13 14 15 16 17 18 19 20 21 22 23 24 FUNCTION Vin Vin Vout Vout Ground Vout Ground Vout Ground Vout Ground Vout
CAUTION: High internal temperatures. Ensure that unit is not user accessible.
11 12
File Name: SIL30C.PDF Rev: 04 Mar 2003
SIL30C Series
DC/DC CONVERTERS C Class Non-isolated
12Vin single output
3 NEW Product
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
0.150 (3.82) 0.120 (3.05)
0.470 (11.94)
All dimensions in INCHES (mm) General tolerance 0.015in (0.30mm) except where specified otherwise
0.050 (1.27) Ref.
1.250 (31.75
1.350 (34.36)
1.240 (31.40)
0.050 (1.27)
0.100 (2.54) Typ. 2.300 (58.42) 2.400 (60.96)
0.150 (3.81) Ref. 0.212 (5.38) 0.120 (3.05)
1.200 (30.48) 0.290 (7.46)
0.090 (2.29)
Figure 1: Mechanical Drawing - Horizontal Mount Version
0.500 0.020 (12.80 0.50) 0.080 0.020 (1.90 0.50)
All dimensions in inches (mm) General tolerance 0.015in (0.30mm) except where specified otherwise 0.062 (1.57) Ref
2.400 (60.96)
1.250 (31.75)
0.140 (3.56 Typ)
0.050 (1.27) 0.025 (0.64) Typ
0.100 (2.54) Typ 2.300 (58.42)
Pin 1 0.050 (1.27) Typ 0.025 (0.64) Typ 0.260 0.030 (6.59 0.76) 1.200 (30.48)
0.140 (3.56)
0.090 (2.29) 0.250 (6.35)
Figure 2: Mechanical Drawing - Vertical Mount Version
Data Sheet (c) Artesyn Technologies(R) 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: Application Note Longform Data Sheet
www.artesyn.com
File Name: SIL30C.PDF Rev: 04 Mar 2003

▲Up To Search▲

Price & Availability of SIL30C

	To Download SIL30C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .